MIRAGE

Neutral Floor Finish Maintainer & Cleaner

  • Description

    Outstanding cleaner and re-conditioner especially designed for maintenance of modern floor finishes. The unique two way synergistic detergent system contains chelating agents, neutral buffers, and anti-resoiling aids to maximize cleaning performance while increasing the gloss of the floor finish.

    Authorized USDA Product


    Key Market Information

    Education
    Students bring about conditions only flooring surfaces in schools experience. MIRAGE is proven to be up for the challenge of keeping hallways and classroom floors clean and maintained.
    Retail
    The high amount of foot traffic and long hours of the retail industry require a neutral cleaner like MIRAGE, where the economic one ounce per gallon dilution ratio goes a long way.
    Government
    Dilutabe at 1 ounce per gallon, MIRAGE is a no rinse, neutral range pH cleaner for the modern floor systems present in a wide variety of facilities.
    Building Service Contractors
    Building Service Contractors prefer MIRAGE for its ability to not only clean and maintain, but also leave behind a pleasant fragrance that leaves a lasting impact when their clients return to the facility.
    Code: 0925
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
  • Specifications

    • ColorBlue
    • OdorPleasant
    • pH (Concentrate)10.0
    • pH (1:128)8.0 ± 0.3
    • SolubilityComplete in water
    • Specific Gravity (g/cc)1.01 ± 0.01
    • Density (lbs/gal)8.4 ± 0.1
    • Anti-slip ReductionNone
    • High Temp. Cloud>140°F
    • Low Temp. Cloud< 32°F
    • Freeze-Thaw StableYes
    • Flash PointNot available
    • ToxicNo
    • DetergencyRapid and Excellent
    • CleaningSuperior, Film Free
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Mirage TDS English GHS.pdf Safety Data Sheet MIRAGE SDS English.pdf Miscellaneous Documents Mirage (Diluted 1-10, 1-20, 1-32, 1-64, 1-128) GHS Secondary Label 6 up.pdf
  • Directions

    Dilute MIRAGE™ using the chart below as a guideline, in warm or cold water.

    Apply MIRAGE™ by mopping, brushing, foaming or any other convenient method.

    Light Duty Cleaning: 1 - 2 OZ/GAL.
    Floor Finish Maintenance: 1 - 2 OZ/GAL.
    General Cleaning: 4 - 6 OZ/GAL.
    Heavy Duty Cleaning: 6 - 12 OZ/GAL.

    Adjust concentrations above based on soiling conditions.
    Rinsing is not required before re-coating, at a dilution of one ounce per gallon.

  • Features & Benefits

    • Maximum safety / Contains no; soap, phosphates, free alkali or ammonia.
    • Increases gloss of the floor finish / Requires only damp mopping to improve appearance
    • Non-residual Chelated formulation / Not affected by hard water
    • No rinse required / When used as directed, leaves surface shining
    • Safe for use on floor finishes / Will not damage floor finish
  • Video

  • Safety

    WARNING: CAUSES SERIOUS EYE IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Wash thoroughly after handling. Wear eye/face protection.
    Response: If on skin: Wash with plenty of water. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists get medical advice/attention. Take off contaminated clothing and wash before reuse.
    Storage: Store away from incompatible materials.
    Disposal: Dispose of waste and residues in accordance with local authority requirements.
    This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products