Ultra High Speed Kleen & Burnish

  • Description

    A unique burnishing solution designed to clean, repair, protect and enhance floor finish gloss. This blend of penetrants, moisturizers, polishing agents and polymers provides maximum flexibility to floor finishes. Can be applied to floor coating through the use of an auto scrubber or by simply mopping onto the floor. Will produce exceptional results on any type of floor finish.

    Authorized UL Product

    Key Market Information

    In areas where a high gloss is desired, Spit Shine will not only bring about that high gloss, but will also harden the finish to stand up to the toughest environments under high retail traffic.
    Code: 0575
    Packaging: 4 x 1 Gal./Case; 12 x 32 oz Qt./Case
  • Specifications

    • TypeBlended emulsion
    • pH8.8
    • ColorLight Blue
    • OdorFloral (Puri™).
    • Film AppearanceClear
    • PowderingNone
    • Flash PointNot available
    • Slip ResistantYes
    • Freeze Thaw StableYes (3 cycles)
    • Gloss RestorationOutstanding
    • LevelingExcellent
    • Black Mark ResistanceExcellent
    • Soil ResistanceSuperior
    • Scuff ResistanceSuperior
    • RecoatabilityExcellent
    • DurabilityExcellent
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Spit Shine TDS English GHS.pdf Safety Data Sheet SPIT SHINE SDS English.pdf Safety Data Sheet SPIT SHINE (Diluted 1-128) SDS English.pdf Miscellaneous Documents Spit Shine (Diluted 1-32, 1-64, 1-128) GHS Secondary Label 6 up.pdf
  • Directions

    Auto-Scrub Method:

    1.  Dust mop or sweep floor. 
    2.  Dilute SPIT SHINE™ 2-4 ounces per gallon of cool water. Scrub floor with SPIT SHINE™ and pick up solution. 
    3.  Allow floor to dry completely. 
    4.  Burnish floor using recommended pad.


    Mop-On Method:

    1.  Dust mop or sweep floor. 
    2.  Dilute SPIT SHINE™ 1-2 ounces per gallon of cool water. Mop floor clean with SPIT SHINE™ and pick up soil with tightly wrung out cleaning mop. 
    3.  Allow floor to dry completely. 
    4.  Burnish floor using recommended pad.


    Spray Buffing:

    1.  Place SPIT SHINE™ into a trigger sprayer or other suitable spraying device. 
    2.  Apply a very light mist of SPIT SHINE™ to a small area directly in the path of the floor machine and immediately burnish to a high gloss. 
    3.  A heavier application may be made directly on black heel marks or heavily worn areas.


  • Features & Benefits

    • Enhances deep wet look gloss of finish / Maximum user appeal
    • Cleans and polishes in one step / Saves labor costs
    • Adds protection to wear layer of finish / Increases scuff and scratch resistance
    • “Hardens” finish film / Enhanced wearability of floor finish
    • Multipurpose formulation / Reduces inventory
  • Video

  • Safety

    Precautionary statement:

    Prevention: Observe good industrial hygiene practices.
    Response: Wash thoroughly after handling.
    Storage: Store away from incompatible materials.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
    This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available on the web at www.nclonline.com

Companion Products