Ultra Concentrated No-Rinse Speed Stripper
BOLT™ is an ultra concentrated formula that quickly penetrates and removes even extreme floor finish build-up. Excellent wetting and slow drying features save time and labor. Compared to leading floor strippers BOLT™ is 2 to 4 times more active. It contains no caustics, and does not require a neutralizing flood rinse.
Key Market Information
HealthcareLightning fast speed to finish the job quickly with low odor for patient/resident acceptance.Code: 1069Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case; 12 x 32 oz Qt/Cs
- ColorPale Straw
- Upper Cloud Point>130°F
- Lower Cloud Point< 33°F
- Viscosity (cps)< 10 cP
- Water SolubilityComplete
- Finish RemovalExcellent
- Damage to Resilient TilesMinimal
- Density (lbs/gal)7.9 ± 0.1
- Specific Gravity (g/cc)0.95 ± 0.01
- Free RinsingYes
- Low FoamingYes
- Shelf Life1 year minimum in original unopened container
DocumentationTechnical Data Sheet Bolt TDS English GHS.pdf Safety Data Sheet BOLT SDS English.pdf Miscellaneous Documents Bolt Flyer.pdf Miscellaneous Documents Ingredient Disclosure - Bolt
Follow dilution recommendations. Dilute using cold water only.
Light/Normal Buildup: 4 oz per gallon of water (1:32)
Heavy Buildup (Burnished): 16 oz per gallon of water (1:8).
Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old liquified finish with a wet vacuum and allow floor to dry completely. If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.
Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution. We recommend that a spot test be conducted before general use.
Features & Benefits
- Ultra concentrated / Lightning Fast Stripping Performance
- Superb wetting system/ Remains wet longer to eliminate extra work.
- Requires no flood rinse or neutralization step / Saves time by eliminating neutralizing and rinsing
- Low odor formula / For use in virtually any situation.
- Low foaming / Easy clean-up with automatic scrubbers and wet vacuums.
DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. HARMFUL IF SWALLOWED, IN CONTACT WITH SKIN OR IF INHALED. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Do not breathe mist or vapor. Use only in well-ventilated areas. Wear protective gloves/clothing and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Keep out of reach of children.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage: Store locked up. Store in a well-ventilated place. Keep cool.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.