ZooooM™

All Green Speed Stripper

  • Description

    ZOOOOM™ is a revolutionary new environmentally responsible floor stripper that utilizes our exclusive non-butyl G-10™ Technology to “zoom” through and emulsify even heavily burnished floor finish! G-10™ is proprietary technology developed by NCL that enhances the stripping process. G-10™ in conjunction with ZOOOOM’s eco-friendly blend of readily biodegradable ingredients and emulsifiers actively penetrate dried floor finish films for fast, thorough stripping action. ZOOOOM’s low-odor formula with a mild pH contains no harsh caustics yet achieves outstanding wetting and maximum penetration for easy floor finish removal.


    Key Market Information

    Education
    Protect the safety and healthy of maintenance workers, faculty, and students while effectively removing even the toughest burnished finishes.
    Code: 1065
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case
  • Specifications

    • ColorPale yellow
    • OdorMild
    • pH (concentrate)11.2
    • pH (In dilution)10.5 ± 0.3
    • Specific Gravity (g/cc)1.04 ± 0.01
    • Lower Cloud Point< 33°F
    • Upper Cloud Point>130°F
    • Viscosity (cps)< 10 cP
    • Water SolubilityComplete
    • StrippingOutstanding
    • Free RinsingYes
    • Low OdorYes
    • Shelf Life1 year minimum in original unopened container
  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Zoom TDS English GHS.pdf Safety Data Sheet ZOOOM SDS English.pdf
  • Directions

    FLOOR MACHINE STRIPPING SYSTEM: Dilute ZOOOOM™ using the chart below as a guideline in cool or mildly warm water.

    Light / Normal Build-Up: 8 OZ/GAL. of water (1:16) 
    Heavy Build-Up: 16 OZ/GAL. of water (1:8) 
    Extreme Build-Up: 32 OZ/GAL. of water (1:4) 

    Apply ZOOOOM™ stripping solution using a wet mop or automatic scrubber. Allow to stand for 3 to 5 minutes for stripper to penetrate finish. Then scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove excess stripping solution and old finish with a wet vacuum and allow floor to dry completely. Rinse with clear water to remove all remaining stripper residue. Apply new finish per manufacturers recommendation.

    MOP/WET VACUUM STRIPPING SYSTEM: Dilute ZOOOOM™ using the chart below as a guideline in cool or mildly warm water.

    Normal Build-Up: 25 OZ/GAL. of water (1:5) 
    Heavy Build-Up: 64 OZ/GAL. of water (1:2) 

    Apply liberally with a mop to an area approximately 10’ X 10’. Allow to stand for 3 to 5 minutes for stripper to penetrate finish. Do not allow stripping solution to dry. Agitate using a wet mop and remove excess stripping solution and old finish with a wet vacuum. Allow floor to dry thoroughly and apply new finish as directed by manufacturer.

    Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution.  We recommend that a spot test be conducted before general use.

  • Features & Benefits

    • Exclusive non-butyl G-10™ wetting technology works with lightning speed on even heavily burnished floor finish
    • G-10 Technology promotes slower evaporation allowing ZOOOOM™ to stay wet longer
    • Reduces problems with dryback to save time and labor.
    • Low-Odor, mild pH formula is safer for workers and building occupants.
    • Produced without harsh solvents; Environmentally Responsible, readily biodegradable ingredients
    • Powerful stripping action/ Saves time and labor.
  • Video

  • Safety

    DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Do not breathe mist or vapor. Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection.
    Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor.
    Storage: Store locked up.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products