SUPER-SONIC™

Intensive Speed Stripper

Description
Directions
Features & Benefits
Specifications
Safety
Documentation
Video

Description

A breakthrough formulation for all stripping applications. Utilizing exclusive AST. technology, this product liquefies floor finish build-up with unbeatable speed! It may be used on vinyl composition tile, vinyl tile and other resilient floors. SUPER-SONIC™. is also ideal for terrazzo and many other non-resilient surfaces.

Code: 1054

Packaging: 5 Gal Pail
Specifications
- Evaporation Rate= To Water
- Solubility In WaterComplete
- Specific Gravity (g/cc)1.01 ± 0.01
- Upper Cloud>140°F
- Lower Cloud< 34°F
- pH13.6
- Freeze ThawStable
- Hard WaterStable
- AppearanceClear, Thin Liquid
- OdorMild
- Boiling Point (°F)210
- Shelf Life2 years minimum in original unopened container
Disinfectant Efficacy
Documentation
Technical Data Sheet Super-Sonic TDS English GHS.pdf Safety Data Sheet SUPER SONIC SDS English.pdf Product Flyers, Brochures, and Equipment Manuals World Class Floor Care Brochure
Directions

Mop/Wet Vacuum Stripping System:
For Light/Medium Duty Build-Up: Dilute 1 part SUPER-SONIC™ in cold or mildly warm water with 16 parts water.
For Heavy Duty Build-Up: Dilute 1 part SUPER-SONIC™ in cold or mildly warm water with 5 parts water.

Apply liberally with a mop to an area small enough so as not to allow the product to dry and allow to stand for 3 to 5 minutes. Agitate with a mop and remove solution and old finish with a wet vacuum. Allow floor to dry thoroughly and apply new finish as directed by manufacturer. If complete stripping is not accomplished repeat the above procedure before re-application of recommended NCL Floor Finish.

Floor Machine Stripping System:
For Light/Medium Duty Build-Up: Dilute 1 part SUPER-SONIC™ in cold or mildly warm water with 16 parts water.
For Heavy Duty Build-Up: Dilute 1 part SUPER-SONIC™ in cold or mildly warm water with 5 parts water.

Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old finish with a wet vacuum and allow floor to dry completely. If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.

Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution. We recommend that a spot test be conducted before general use.
Features & Benefits
- AST technology promotes exceptionally rapid liquefacation of floor finish
- Highly active formula allows for product to be used at higher dilution ratios; saves product cost
Video
Safety

DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. HARMFUL IF SWALLOWED. HARMFUL IF INHALED. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
Precautionary statement:
Prevention: Do not breathe mist or vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Wash contaminated clothing before reuse.
Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal: Dispose of waste and residues in accordance with local authority requirements.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.