POP & SHINE™
A revolutionary product that renovates floor finish and restores floors to maximum gloss…like magic! Especially selected polishing agents and cleaners help to remove scratches and scuffs from floors while rejuvenating the floor to a brilliant lustre. Saves labor; extends scrub / strip cycles. A must for every high speed / UHS Burnishing Floor Care program!
Authorized UL Product
Key Market Information
EducationSchool hallways that start to show signs of wear and tear will be brought back to life with super concentrated POP & SHINE™, creating an ultra hard wear film that will shine as bright as when finish was first applied.
HealthcareRestores worn out floors and creates a super hard film to protect the surface. Allows the floors to maintain a clean, sterile, and welcoming atmosphere for patients.
IndustrialPOP & SHINE™ quickly restores floor worn down from the strain of a heavy industry environment and forms an ultra hard wear film to further protect the flooring surface and keep heavy industry facilities running.
GovernmentFrom VCT office flooring to concrete floors in wareshouse settings, POP & SHINE™ can be relied upon to provide a hard, durable shell for added protection on a floor, along with rejuvenating the floor's gloss back to the level from when finish was first applied.
Building Service ContractorsPreserve the strength and durability of a facility's floors while also producing an amazing gloss that will "wow" your clientsCode: 0545Packaging: 6 - 1 Liter Dual Neck Measuring Containers/Case
- AppearanceAmber Liquid
- pH (Concentrate)10.7
- Upper Cloud>140°F
- Cold Stability< 32°F
- Specific Gravity (g/cc)1.01 ± 0.01
- Density (Ibs/gal)8.33 ± 0.15
- Flash Point (°F TCC)Not available
- Gloss enhancementSuperior
- Scuff / Scratch RemovalExcellent
DocumentationTechnical Data Sheet Pop & Shine TDS English GHS.pdf Safety Data Sheet POP-SHINE SDS English.pdf Safety Data Sheet POP-SHINE (Diluted 1-64) SDS English.pdf Miscellaneous Documents Pop & Shine flyer.pdf Miscellaneous Documents Pop & Shine (Diluted 1-32, 1-64) GHS Secondary Label 6 up.pdf
FOR USE AS A SPRAY BUFF: Dilute product at a rate of 1 oz. per quart (1:32) into spray bottle; affix trigger sprayer. Spray product onto 10’ x 10’ section of floor to be buffed at one time. Using the AQUA MAGIC™ UHS Burnishing Pad, you may buff the floor using an ultra high speed burnisher and pad. Buff slowly to work the product into the film.
FOR USE AS A FLOOR RESTORER: Dilute product at a rate of 2 oz. per gallon (1:64) into bucket or automatic scrubber. Apply solution at 2500-3000 square feet per gallon (a little goes a long way!) When dry, buff the floor using an ultra high speed burnisher and AQUA MAGIC™ UHS Burnishing Pad. Buff slowly to work the product into the film.
NOTE: BE SURE THAT AN ADEQUATE AMOUNT OF FLOOR COATING IS PRESENT ON THE FLOOR. FOR INTERIM FLOOR MAINTENANCE: Mix solution of 4 oz. per gallon (1:32). Lightly mop solution onto the floor and ultra high speed burnish the floor while still wet with an AQUA MAGIC™ UHS Burnishing Pad. This will remove deep scuffs and scratches from floor finish film and enhance overall gloss.
NOTE: PRODUCT MUST ALWAYS BE DILUTED BEFORE USE
Features & Benefits
- Super concentrated; reduces shipping costs
- Bright, Wet Look gloss
- Ideal for Multi Speed Polishing and Burnishing
- Easy leveling, fast drying for added labor savings
WARNING: CAUSES SERIOUS EYE IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Wash thoroughly after handling. Wear protective gloves/eye protection/face protection.
Response: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Storage: Store in a well-ventilated place. Keep container tightly closed. Keep cool.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are listed on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.