Rapid Action Stone Crystallizer
A new dimension in stone restoration. Rapidly repolishes worn marble, limestone and other calcium-containing natural surfaces. Easy to-Use; just spray and buff surface to a dazzling polish. NCL-2™ RAPID ACTION STONE CRYSTALLIZER has been developed as a simple-to-use restoration system for marble, terrazzo and polished limestone floors. NCL-2™ RAPID ACTION STONE CRYSTALLIZER produces a very high polish. This newly restored surface will resist scuffs and scratches. This restored surface will be very durable. NCL-2™ RAPID ACTION STONE CRYSTALLIZER dries as you buff and therefore requires no messy clean-up.Code: 2529Packaging: 55 Gal. Drum; 4 x 1 Gal./Case
- Product typeVitrification
- Compound AppearancePink Opaque liquid
- OdorMild, Bland
- Specific Gravity (g/cc)1.16 ± 0.01
- pH (concentrate)1.5 ± 0.5
- Flash PointNone
- Safe on StoneYes
- Scuff ResistanceExcellent
- Scratch ResistanceExcellent
- Increased glossOutstanding
DocumentationTechnical Data Sheet NCL-2 TDS English GHS.pdf Safety Data Sheet NCL-2 SDS English.pdf Miscellaneous Documents NCL-2 Brochure.pdf Miscellaneous Documents NCL-2 (Undiluted) GHS Secondary Label 6 up.pdf
SHAKE WELL BEFORE USING
NOTE: Since marble and limestone are a product of nature and their components can vary, they may react differently to this product. For this reason, always test in a small inconspicuous area as a precaution.
SURFACE PREPARATION: Surface must be clean and dry. On floor surfaces, make sure all waxes, floor finish or other coatings are removed. If there is a coating on the floor, use NCL HURRICANE™ Intensive Stone Cleaner for removal. Rinse surface thoroughly with water and air dry prior to crystallization.
PLEASE NOTE: Worn out or damaged surfaces may require resurfacing prior to crystallization. Make sure to cover any sensitive surfaces such as metals, glass, carpet, etc. that may be exposed to over-spray.
APPLICATION: It is normal for this product to separate into layers when standing. SHAKE WELL BEFORE USING. Use a 175 RPM Floor machine designed for crystallization (130 - 180 lbs.), equipped with a #0 or #1 grade steel wool pad. Apply NCL-2™ RAPID ACTION STONE CRYSTALLIZER (with a spray bottle with trigger) at a rate of 2 to 3 squirts per square yard (.836 sq. meter) and immediately buff until surface is completely dry. Buff in both directions until desired gloss is achieved. NCL-2™ RAPID ACTION STONE CRYSTALLIZER yields approximately 2000-5000 square feet (185 - 465 sq. meters) per gallon of coverage.
For daily maintenance after re-polishing, use the SCS Daily Maintenance System (PATINA™-HURRICANE™); see the NCL STONE CARE SOLUTIONS™ brochure for more information.
Features & Benefits
- Rapid action
- Builds resistance to scuffs and scratches
- Use on marble, terrazzo, and polished limestone floors
- Mild odor
No Video Available
DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION. HARMFUL IF SWALLOWED. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Do not breathe mist or vapor. Wear protective gloves/protective clothing/eye protection/face protection. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage: Store locked up.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.