EXPOSE™

Non-Ammoniated Stripper

  • Description

    A non-ammoniated, non-butyl stripper that removes floor finish, sealers and wax from resilient floor surfaces. This cost effective product utilizes wetting agents, amines, penetrants and synthetic detergents to safely remove modern day floor finishes.

    Code: 1050
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case

  • Specifications

    • ColorColorless
    • OdorOdorless
    • pH (Concentrate)13.5
    • pH (1:6)12.9 ± 0.3
    • Flash PointNot available
    • Water SolubilityComplete
    • Foam LevelLow to medium
    • Viscosity (cps)< 10 cP
    • Density (lbs/gal)8.9 ± 0.1
    • Floor Finish & Wax RemovalExcellent
    • Shelf Life1 year minimum in original unopened container

  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Expose TDS English GHS.pdf Safety Data Sheet EXPOSE SDS English.pdf Product Flyers, Brochures, and Equipment Manuals World Class Floor Care Brochure

  • Directions

    Apply a diluted solution of EXPOSE™ liberally and allow to stand on the floor for 5 minutes. Agitate with a floor machine equipped with a synthetic stripping pad. Remove the dirty solution of re-emulsified wax with a mop or wet-vac. Rinse the floor with clean water and allow to dry before re-waxing.

    For Light Detergent Resistant Floor Finish Buildup or Wax Removal: 1 part stripper to 16 parts water (8 oz./gal.).

    For Normal Detergent Resistant Floor Finish Buildup or Wax Removal: 1 part stripper to 12 parts water (10 oz./gal.).

    For Heavy Floor Finish Buildup or Wax and Sealer Removal: 1 part stripper to 6 parts water (20 oz./gal.).

  • Features & Benefits

    • Cost effective / Low material cost saves inventory dollars
    • Cannot damage floor surfaces / Safe for resilients, ceramics, marble and terrazzo
    • Non-ammoniated formula / No irritating ammonia fumes
    • Effective wetting system / Keeps finish moist allowing the product to work at all times
    • Use on any type of finish or wax / Will remove metal interlocked finishes or old wax

  • Video

  • Safety

    DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Do not breathe mist or vapor. Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection.
    Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Specific treatment (see this label).
    Storage: Store locked up.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products

Wet Look Premium Grade Floor Finish

Rubber Wax and Conditioner

Soil and Floor Finish Build-Up Remover