ENSEEL™

Acrylic Sealer & Undercoater

• Description
• Directions
• Features & Benefits
• Specifications
• Safety
• Documentation
• Video

• Description

  An all acrylic, water emulsion sealer that protects floor surfaces from water, dirt and abrasive wear. This product provides floor maintenance cost savings by eliminating frequent strippings and re-coatings. This pure acrylic brilliant primer is produced in high pressure reactors using proprietary designed polymer emulsions, interacted plasticizers, leveling aids, antifoam agents and deionized water to insure maximum performance.

  Code: 0504
  Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case

• Specifications

  • TypeAcrylic
  • pH8.1
  • Re-coat45 minutes
  • Volatile hydrocarbon solventsNone
  • Drying time (minutes)20
  • Color of dried filmWhite
  • Color of liquidWhite
  • Coverage (sq. ft. / gal)1st coat 1500 - 1800
  •  2nd coat 1800 - 2000
  • Flash pointNot available
  • Viscosity (cps)< 10 cP
  • StabilityExcellent
  • Sediment (%)< 0.05
  • Density (lbs/gal)8.5 ± 0.1
  • Specific gravity (g/cc)1.02 ± 0.01

• Disinfectant Efficacy

• Documentation

  Technical Data Sheet Enseel TDS English GHS.pdf Safety Data Sheet ENSEEL SDS English.pdf CA Designated List Ingredient Disclosure - Enseel Product Flyers, Brochures, and Equipment Manuals World Class Floor Care Brochure

• Directions

  Floor Preparation: Strip floor thoroughly with your preferred NCL floor stripper, making sure that all old film is removed. Rinse completely and allow to dry.

  Application of Sealer: Using a clean string mop or applicator, apply a thin even coat of ENSEEL™ Acrylic Sealer and allow to dry for at least 30 minutes. On very porous floors apply a thick coat and allow to soak 5 minutes. Pick up excess, if any, before ENSEEL™ Acrylic Sealer begins to dry. To increase the appearance of the surface a second coat may be applied. After ENSEEL™ Acrylic Sealer has been allowed to completely cure, apply the recommended NCL Floor Finish following recommendations on product label.

• Features & Benefits

  • Tough wear surface / Long lasting protection
  • Water-based / No dangerous fumes
  • Fast drying / Less waiting time
  • Designed for ease of application / May be applied by any personnel without extensive training
  • All acrylic formulation / Can be stripped easily

• Video

• Safety

  KEEP OUT OF THE REACH OF CHILDREN
  Precautionary statement:
  Prevention: Observe good industrial hygiene practices.
  Response: Wash thoroughly after handling.
  Storage: Store away from incompatible materials.
  Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
  This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
  Additional safety measures:
  Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.e.com

Companion Products