BARE BONES SC Stripper Super Concentrate
An ultra concentrated (over 99% active) formula that quickly cuts through multiple layers of floor finish with excellent wetting and fast penetration of burnished, aged films. Low foaming for use in mop and bucket applications, automatic scrubbers and wet vacuums. Compared to leading floor strippers this product is 2 to 4 times more active, and it does not require a neutralizing flood rinse.Code: 5092Packaging: 4 X 80 Oz./Case
- pH (@1:20)11.2 ± 0.2
- Viscosity (cps)< 5 cP
- Water SolubilityComplete
- Finish RemovalExcellent
- Damage to Resilient TilesMinimal
- Density (lbs/gal)7.8 ± 0.1
- Specific Gravity (g/cc)0.93 ± 0.01
- Free RinsingYes
- DUAL-BLEND® Dilution Ratio1:20
- Case Yield52.5 gal / 212 qts
- Shelf Life1 year minimum in original unopened container
DocumentationTechnical Data Sheet Dual-Blend 22 Bare Bones SC TDS English GHS.pdf Safety Data Sheet DUAL-BLEND 22 BARE BONES SC SDS English.pdf Safety Data Sheet DUAL-BLEND 22 BARE BONES RTU (1-20) SDS English.pdf Miscellaneous Documents DB 22 Bare Bones SC Flyer.pdf
Attach DUAL-BLEND® bottle by threading the bottle onto the wall unit mating cap or DUAL-BLEND® Portable Dispensing Unit and tighten securely.
NOTE: The DUAL-BLEND® bottle is designed for use with the DUAL-BLEND® Wall Dispenser and the DUAL-BLEND® Portable Dispensing Unit. Dilution tips built into the product containers provide precise, accurate dilution for every product, every time, regardless of dispensing equipment chosen.
DIRECTIONS FOR USE:
Fill BARE BONES® SC solution from the DUAL-BLEND® Dispensing Unit at a dilution rate of 1:20 (5 oz. per gallon) into a mop bucket or automatic scrubber. Use cold tap water only.
Apply liberally to an area small enough so as not to allow the product to dry and allow to stand for 3 to 5 minutes. Scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old liquefied finish with a wet vacuum or automatic scrubber. Allow floor to dry thoroughly and apply recommended NCL Floor Finish as per instructions.
NOTE: Asphalt tile, Linoleum and other sensitive floor surfaces may be damaged by contact with stripping solution. We recommend that a spot test be conducted before general use.
Features & Benefits
- Ultra concentrated (over 99% active)
- Powerful wetting agents and fast penetration save time and labor.
- Superb wetting system, remains wet longer to eliminate frequent re-wetting.
- Requires no flood rinse or neutralization step / Saves time by eliminating neutralizing and rinsing
- Low foaming makes cleanup easy with automatic scrubbers and wet pick-up vacuums.
DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. HARMFUL IF SWALLOWED, IN CONTACT WITH SKIN OR IF INHALED. MAY CAUSE RESPIRATORY IRRITATION. COMBUSTIBLE LIQUID. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Do not breathe mist or vapor. Use only in well-ventilated areas. Wear protective gloves/clothing and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Keep out of reach of children.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage: Store locked up. Store in a well-ventilated place. Keep cool.
Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.