QWIK-SCRUB™

Scrub & Recoat Cleaner

  • Description

    QWIK-SCRUB™ is a heavy-duty, water-based cleaning concentrate designed for scrub / re-coat maintenance procedures. It is ideal for use in automatic scrubbers equipped with proper floor pad or brush. Using a mild pH range formulation, QWIK-SCRUB™ aggressively removes embedded soils and scuffs in upper layers of finish film, and prepares the surface for re-coating with a minimum of rinsing, saving time and labor.

    Key Market Information

    Education
    In between the common floor stripping times of winter breaks and summer vacations, use QWIK-SCRUB™ to periodically deep scrub and prepare the surface for a re-coating.
    Healthcare
    QWIK-SCRUB™ delays the stripping cycle, cutting down on the floor stripping events which inconvenience staff and patients in 24 hour facilities.
    Retail
    Floor stripping requires areas of a merchandise floor to be closed off to customer traffic during open hours and requires staff to be present if done during off hours. QWIK-SCRUB™ delays those costly stripping events and allows floor techs to apply a fresh coating to keep floors looking great.
    Industrial
    When production cycles prohibit a facility from frequent shut-downs for floor stripping, performing a deep scrub and recoat is a quick and efficient alternative.
    Government
    Prepare surfaces throughout the facility to accept a recoating of finish. Delays the stripping cycle, cutting down on the floor stripping events to maximize manpower production and revenue.
    Building Service Contractors
    Building Service Contractors know that the ability to delay the stripping portion of the floor care life cycle while also being able to maintain the impressive appearance of the floors in a facility through deep scrubbing and recoating results in satisfied clients.
    Code: 0955
    Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case

  • Specifications

    • ColorPink
    • OdorOrange
    • pH (Concentrate)9.9
    • Upper Cloud>140°F
    • Lower Cloud< 25°F
    • Flash PointNot available
    • BiodegradableYes
    • Specific Gravity (g/cc)1.01 ± 0.01
    • Density (lbs/gal)8.4 ± 0.1
    • Free RinsingYes
    • Non CorrosiveYes
    • Shelf Life1 year minimum in original unopened container

  • Disinfectant Efficacy

  • Documentation

    Technical Data Sheet Qwik-Scrub TDS English GHS.pdf Safety Data Sheet QWIK-SCRUB SDS English.pdf Safety Data Sheet QWIK-SCRUB RTU (1-12, 1-25) SDS English.pdf Secondary Label QWIK-SCRUB (Diluted 1-12, 1-25) GHS Secondary Label 6 up.pdf Product Flyers, Brochures, and Equipment Manuals Qwik-Scrub Flyer.pdf Product Flyers, Brochures, and Equipment Manuals World Class Floor Care Brochure

  • Directions

    DILUTE PRODUCT AS FOLLOWS:
    Moderate soil /build-up, Light finish removal: Dilute 5 oz. (1:25) of QWIK-SCRUB™ per gallon of warm water
    Heavy soil /build-up, Heavy finish removal: Dilute 10 oz. (1:12) of QWIK-SCRUB™ per gallon of warm water

    SCRUB/RE-COAT USING STANDARD 175 RPM FLOOR MACHINE: Dilute QWIK-SCRUB™ in mop bucket according to above dilution directions. Liberally mop solution onto floor surface and allow to dwell for 1 to 4 minutes (depending on how deeply it is desired to scrub). With machine and scrub floor pad or brush, scrub surface of floor until all embedded soils and scuffs are removed from finish. After scrubbing, remove solution from floor with wet-dry vacuum or a clean mop. Damp mop rinse with clear water to remove any excess residue. Allow floor to completely dry prior to re-coating.

    SCRUB/RE-COAT USING AUTOMATIC SCRUBBER: Dilute QWIK-SCRUB™ in mop bucket according to above dilution directions. Liberally mop solution onto floor surface and allow to dwell for 1 to 4 minutes (depending on how deeply it is desired to scrub). Fill autoscrubber with clear water, mount scrubbing pad or medium grade brush. With vacuum off and squeegee up, scrub the floor until all embedded soils and scuffs are removed from finish. Lower squeegee and vacuum all scrubbing solution. Using clear water from the autoscrubber, rinse floor to remove any excess residue. Allow floor to completely dry prior to re-coating.

  • Features & Benefits

    • Mild range pH formulation aggressively removes embedded soils and scuffs
    • Reduced rinsing saves time and labor
    • Use with standard floor machine or with automatic scrubber

  • Video

  • Safety

    WARNING: MAY CAUSE AN ALLERGIC SKIN REACTION. CAUSES SERIOUS EYE IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
    Precautionary statement:
    Prevention: Avoid breathing mist or vapor. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves. Wear eye/face protection.
    Response: If on skin: Wash with plenty of water. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see this label). If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Wash contaminated clothing before reuse.
    Storage: Store away from incompatible materials.
    Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
    This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
    Additional safety measures:
    Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Companion Products

Extended Performance Floor Finish

No-Rinse / No-Scrub Liquifying Stripper

Neutral Floor Cleaner