BARE BONES® LOW ODOR
Low Odor All-Purpose Speed Stripper
-
Description
BARE BONES® LOW ODOR is a superior floor stripping formula that can be used anywhere, anytime! Like the original BARE BONES that set the standard for performance and labor savings some 20 years ago, BARE BONES® LOW ODOR from NCL provides the same rapid penetration and complete removal of even heavily burnished floor finish in a low odor formula that can be used in hospitals, schools and universities and office buildings.
NCL chemists have designed a wetting system that keeps BARE BONES® LOW ODOR working at maximum effectiveness, with powerful film removing action easily cuts through multiple layers of finish easily! BARE BONES® LOW ODOR is a must for all professional floor care systems.
Key Market Information
Healthcare
The strength of original BARE BONES® LOW ODOR but in a low odor formulation that won't negatively impact patients.Code: 1051Packaging: 55 Gal. Drum; 5 Gal. Pail; 4 x 1 Gal./Case -
Specifications
- ColorClear, colorless
- OdorMild
- pH11.7
- Flash PointNot available
- Upper Cloud Point>130°F
- Lower Cloud Point< 33°F
- Viscosity (cps)< 10 cP
- Water SolubilityComplete
- Finish RemovalExcellent
- Damage to Resilient TilesMinimal
- Density (lbs/gal)8.15 ± 0.1
- Specific Gravity (g/cc)0.98 ± 0.01
- Free RinsingYes
- Low FoamingYes
- Shelf Life1 year minimum in original unopened container
-
Disinfectant Efficacy
-
Documentation
Technical Data Sheet Bare Bones Low Odor TDS English GHS.pdf Safety Data Sheet BARE BONES LOW ODOR SDS English.pdf Safety Data Sheet BARE BONES LOW ODOR RTU (1-5, 1-16) SDS English.pdf Secondary Label Bare Bones Low Odor (Diluted 1-5, 1-16) GHS Secondary Label 6 up.pdf Product Flyers, Brochures, and Equipment Manuals bare bones low odor which corner flyer lr.pdf Product Flyers, Brochures, and Equipment Manuals World Class Floor Care Brochure CA Designated List Ingredient Disclosure - BBLO -
Directions
Dilute BARE BONES® LOW ODOR following dilution recommendations below. Dilute using cold or mildly warm water only.
Light/Normal Buildup: 8 oz per gallon of water (1:16)
Heavy Buildup (Burnished): 20 oz per gallon of water (1:5)
Mop/Wet Vacuum Stripping System: Apply liberally with a mop to an area small enough so as not to allow the product to dry and allow to stand for 3 to 5 minutes. Agitate with a mop and remove solution and old finish with a wet vacuum. Allow floor to dry thoroughly and apply new finish as directed by manufacturer. If complete stripping is not accomplished repeat the above procedure before re-application of recommended NCL Floor Finish.
Floor Machine Stripping System: Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old finish with a wet vacuum and allow floor to dry completely. If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.
Note: Asphalt tile, Linoleum, and other sensitive floor surfaces may be damaged by contact with stripping solution. We recommend that a spot test be conducted before general use.
-
Features & Benefits
- Low odor
- No scrubbing machine needed
- High use-dilution for greater economy
- Can be used in automatic scrubbers (low foaming)
- Cuts through multiple layers of finish easily!
- BARE BONES® LOW ODOR is a must for all professional floor care systems.
-
Video
-
Safety
DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE. HARMFUL IF SWALLOWED. HARMFUL IF INHALED. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
Precautionary statement:
Prevention: Do not breathe mist or vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Wash contaminated clothing before reuse.
Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal: Dispose of waste and residues in accordance with local authority requirements.
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
Additional safety measures:
Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.